S30-C

SkyPanel is available in three sizes: the S120, S60 and S30. The S120 is twice as long as the S60, but weighs nearly the same. Its larger light aperture makes a great soft light even better. Retaining the same features and color tuneability as its smaller counterparts, the S120 consumes less than 400 watts, yet it is slightly brighter than the S60-C and has an outstanding efficacy of 90 lumens per watt. The S60 is a mid- range model, featuring a light aperture of 645 x 300 mm and accommodating the vast majority of applications. The S30 is a smaller, more portable version; half the length of the S60, it is perfect for on-the-go mobile applications. The S60 and the S30 are available in fully color tuneable and remote phosphor versions.

Unlike other tuneable fixtures, SkyPanel makes no sacrifice when it comes to light output. SkyPanel puts out a tremendous amount of light, in a soft and uniform beam field. Brighter than a 1 kW tungsten soft light or a 3 kW tungsten space light, the SkyPanel S30 has more than enough light for most applications. At the same time, the lamphead is able to perform beautifully at lower light levels. This range of illumination and color gives users an unprecedented amount of control.

Features

  • Fully Tuneable from 2,800 K - 10,000 K
  • Plus/Minusgreen correction
  • Vibrant Color Selection (RGB+W Color Gamut)
  • Hue and Saturation Control
  • High Color Rendering
  • Low Power Consumption (200 W Nominal)
  • Tremendous Output - Brighter than 1kW Tungsten Soft Light
  • Fully Dimmable from 0 - 100%
  • Lightweight and Compact
  • Beautiful Soft Beam of Light
  • Interchangeable Diffusion Panels
  • Wide Range of Accessories Available
  • Thin Profile
  • On-Board Battery Connection (23 - 36V DC)
  • Onboard Simple Control Panel
  • Onboard DMX In and Out
  • RDM Implementation
  • USB-A Connection for Firmware Updates
  • EtherCon port for network connectivity
  • Available in Blue/Silver and Black
  • Fan Mode Selection
  • External Lightweight PSU
  • powerCON TRUE1 Power Connector

Technical Specifications

Lamphead S30-C
Optical System Soft Diffusion Panel
Light Aperture 355 x 300 mm / (14 x 11.8 inches)
Beam Angle 115º (Half Peak Angle)
Weight Manual Version: 7.4 kg (16.3 lbs)
Pole Op Version: 9.0 kg (20 lbs)
Handling Aluminum Yoke, High Strength Tilt Lock
Pole Operation Option (Pan & Tilt)
Mounting 16 mm / 28 mm Combo Pin (Baby 5/8 inches / Junior 1-1/8 inches Combo Pin)
Tilt Angle +/- 90º
Lamphead Voltage Input 48 V =
Power Consumption 200 W Nominal, 220 W Maximum
Lamphead Power Connection Male 3-Pin XLR - 15 Amp (Pin 1: Negative / Pin 2: Positive)
Battery Connector Male 4-Pin XLR - 10 Amp (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range 23 to 36 V =
Battery Mode Light Output 100 % of total output
White Light 2,800 K to 10,000 K continuously variable correlated color temperature
Colored Light Full RBG+W Color Gamut with Hue and Saturation Control
Color Temperature Tolerance +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Color Rendition CRI Average > 95
TLCI Average > 91
Green-Magenta Adjustment Continuously adjustable (Full Minusgreen to Full Plusgreen)
Dimming 0 - 100 % continuous
Control On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net
Remote Device Management (RDM*) DMX Setup, Hour Counter and Standard RDM Commands
Software Interface Ethernet: DMX Setup, Fixture Status and Firmware Upgrade Through PC, Mac USB-A: Software upgrade via flash drive
Housing Color Blue/Silver, Black
Ambient Temperature Operation -20 to +45ºC (-4 to +113ºF)
IP Rating IP20
Estimated LED Lifetime (L70) 50,000 hours
Estimated Color Shift Over Liftetime +/- 5 %
Certifications CE, CB, ENEC, cNRTLus, FCC, PSE
   
Power Supply Unit S30 PSU
Power Supply Input Range 110 to 240 V ~, 50/60 Hz
Power Supply Output Rnage 48 V =
Power Input Connection powerCON TRUE1 (Bare Ends / Schuko / Edison cables available)
Power Output Connection Female 3-Pin XLR - 10 Amp (Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through)
Weight 2.1 kg (4.6 lbs)
Dimension 388 x 115 x 91 mm (15.3 x 4.5 x 3.6 inches)
Control On-Board On/Off Switch
Mounting SkyPanel PSU Super Clamp Adapter / Rail Mount Adapter
Certifications CE, CB, ENEC, cNRTLus, PSE
* RDM Available in Future Firmware Note: All specifications are nominal / typical values.