L5-TT

Tungsten Tuneable allows for fine-tuning of the tungsten color temperature from 2,600 K to 3,600 K with increased brightness over the L5-C, and is particularly suited to applications requiring precise matching to conventional tungsten lampheads.

The L5 addition to the L-Series perfectly complements the L7, allowing for more mobile lighting and a wider range of power classes for television studios. Its compact size and low weight allow the L5 to be rigged in tight places and hung from low ceilings. The L5 is also ideal for cramped location shoots and interview setups. Low heat allows safer and more comfortable shooting conditions. This versatility and superb light quality make the L5 a highly anticipated addition to the award-winning L-Series family.

New features available on the L5 include a PowerCON power connector and an on-board battery input that permits industry-standard batteries to power the L5 without any sacrifice in terms of features or light output. The resulting increase in portability opens up whole new application areas, giving productions with the L5 the tremendous freedom to move and work fast.

The L5 is approximately 45% brighter than a 300 watt tungsten Fresnel, but only consumes 115 watts. When compared to the L7, the L5 is half the weight and size.

STAND-MOUNT
versions include the following base configuration: 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin), Inline Switch, Integrated 5-Pin DMX In and Thru.

HANGING
versions include the following base configuration: 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin), 1.5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.

POLE-OPERATED
versions include the following base configuration: Pole Operation for Pan, Tilt and Focus, 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin), 1.5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.

Features

  • Fully Tuneable from 2,600 K - 3,600 K
  • Plus/Minusgreen correction
  • More than 5% brighter than L5-C at 3,200 K
  • Perfect for color matching to conventional tungsten lamps
  • High Color Rendering
  • Low Power Consumption (115 W Nominal)
  • Fully Dimmable
  • Lightweight and Compact
  • True Fresnel Lens Light Characteristics
  • On-Board Battery Connection (22 - 36V DC)
  • Onboard DMX In and Out
  • RDM Implementation
  • USB Mini Connection for Firmware Updates
  • Available in Blue/Silver and Black
  • Fan Mode Selection
  • powerCON TRUE1 Power Connector

Technical Specifications

Optical System Focusable Fresnel
Lens Diameter 137 mm / 5 inches
Beam Angle 14° - 50° (Half Peak Angle)
Weight Manual Version - 5.1 kg (11.2 lbs)
Pole Op Version - 7 kg (15.4 lbs)
Handling Adjustable Sliding Stirrup, High Strength Tilt Lock,
Pole Operation Option (Pan, Tilt and Focus)
Mounting 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin)
Tilt Angle +/- 90°
Power Supply Range 90 - 250 V AC, 50 - 60 Hz
Power Consumption 115 W Nominal
Power Connection powerCON TRUE1 (Bare Ends / Schuko / Edison Cables Available)
Battery Connector 4-Pin XLR Connector (Pin 1: Negative / Pin 4: Positive)
Battery DC Voltage Range 22 - 36 V DC
White Light 2,600 K to 3,600 K continuously variable correlated color temperature
Color Temperature Tolerance +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
Color Rendition CRI Average >93, TLCI Average >85
Green-Magenta Adjustment Continuously adjustable (Full Minusgreen to Full Plusgreen)
Dimming 0 - 100 % continuous
Control 5-Pin DMX In and Through, On-Board Controller, Mini-USB
Remote Device Management (RDM) DMX Setup, Hour Counter and Standard RDM Commands
Mini-USB Interface DMX Setup, Fixture Status and Firmware Upgrade Through PC Software
Housing Color Blue/Silver, Black
Ambient Temperature Operation -20 to +45º C (-4 to +113º F)
IP Rating IP20
Estimated LED Lifetime (L70) 50,000 hours
Estimated Color Shift Over Lifetime +/- 5 %
Certifications CE, CB, GS, cNRTLus, FCC, PSE
  Note: All specifications are nominal / typical values.